Cookies Policy

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

I accept this policy

Find out more here

Influence of powder characteristics of alumina in a glass–alumina mixed layer upon constrained sintering of the sandwich substrate with an inner-self-constraining layer

No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.

Brill’s MyBook program is exclusively available on BrillOnline Books and Journals. Students and scholars affiliated with an institution that has purchased a Brill E-Book on the BrillOnline platform automatically have access to the MyBook option for the title(s) acquired by the Library. Brill MyBook is a print-on-demand paperback copy which is sold at a favorably uniform low price.

This Article is currently unavailable for purchase.
Add to Favorites
You must be logged in to use this functionality

Cover image Placeholder

Constrained sintering of substrates with a laminate structure that have an inner-self-constraining alumina layer laminated between two glass–alumina mixed layers has been studied. The influence of the particle size of alumina in the glass–alumina mixed layer's upon firing shrinkage was investigated. Sintering shrinkage in the x–y direction of the substrate decreased with increasing the particle size of alumina in glass–alumina mixed layers. Penetration length of glass to the inner-self-constraining alumina layer increased with increasing particle size of alumina in glass–alumina mixed layers. It was considered that sintering shrinkage in the x–y direction of the substrate and penetration length of a glass into alumina layer will be dependent on the coverage of alumina particles on surface of glass particles. As for the particle size of alumina in glass–alumina mixed layers, it is desirable for it to be the same as the particle size of glass and the coverage of the surface of glass particle with alumina particles should be less than 17.5% in the case of constrained sintering of substrates with an inner-self-constraining alumina layer. Sintering shrinkage in the x–y direction was less than 0.2%.


Full text loading...


Data & Media loading...

Article metrics loading...



Can't access your account?
  • Key

  • Full access
  • Open Access
  • Partial/No accessInformation